HP0-S32 Study Guide, HP5-K03D Real Dumps

Through Pass4Test you can get the latest HP certification HP0-S32 exam practice questions and answers. Please purchase it earlier, it can help you pass your first time to participate in the HP certification HP0-S32 exam. Currently, Pass4Test uniquely has the latest HP certification HP0-S32 exam exam practice questions and answers.

Pass4Test not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service. If you are using our products, we will let you enjoy one year of free updates. So that you can get the latest exam information in time. We will be use the greatest efficiency to service each candidate.

If you are still troubled for the HP HP5-K03D certification exam, then select the Pass4Test's training materials please. Pass4Test's HP HP5-K03D exam training materials is the best training materials, this is not doubt. Select it will be your best choice. It can guarantee you 100% pass the exam. Come on, you will be the next best IT experts.

Exam Code: HP0-S32
Exam Name: HP BladeSystem Networking 2011
One year free update, No help, Full refund!
HP0-S32 Real Dumps Total Q&A: 136 Questions and Answers
Last Update: 2014-08-15

HP0-S32 Exam PDF Detail : Click Here

 

Exam Code: HP5-K03D
Exam Name: Delta - Supporting and Servicing HP 3PAR StoreServ Solutions
One year free update, No help, Full refund!
HP5-K03D Study Guide Total Q&A: 30 Questions and Answers
Last Update: 2014-08-15

HP5-K03D Latest Dumps Detail : Click Here

 

Pass4Test's expert team has developed a latest short-term effective training scheme for HP certification HP0-S32 exam, which is a 20 hours of training for the candidates of HP certification HP0-S32 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass HP certification HP0-S32 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

When you try our part of HP certification HP5-K03D exam practice questions and answers, you can make a choice to our Pass4Test. We will be 100% providing you convenience and guarantee. Remember that making you 100% pass HP certification HP5-K03D exam is Pass4Test.

HP5-K03D Free Demo Download: http://www.pass4test.com/HP5-K03D.html

NO.1 A customer has three HP 3PAR StoreServ 10000 systems in different sites on their
metropolitan campus The FC-based SANs within the different sites consist of B-series 8 Gbps
switches with an active port-based zoning. Between the sites, there is a 10 Gbps Ethernet
connection.
Which remote copy configuration should you recommend?
A. N-to-1 Configuration
B. Synchronous Long Distance Configuration
C. Unidirectional 1-to-1 Configuration
D. 1-to-N Configuration

NO.2 Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives. Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/S FC adapters for the new
7400.
What is the maximum number of configurable host ports on the new HP StoreServ 7400 array in the
customer environment?
A. 4
B. 8
C. 10
D. 12
Answer: D

HP exam prep   HP5-K03D Real Questions   HP5-K03D dumps torrent   HP5-K03D
5. Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/s FC adapters for the new
7400.
During the installation you record these serial numbers for the new HP 3PAR StoreServ system:
HP serial number CZ32439658
3PAR serial number 1628580
Which SPID is assigned during the installation?
A. SP0001628580
B. SP32439658
C. 1628580
D. 00032439658
Answer: A

HP answers real questions   HP5-K03D   HP5-K03D   HP5-K03D exam dumps
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03603825 /c036038
2 5.pdf(page 7, second bullet)
6. Which statements are true about the HP 3PAR StoreServ 7000? (Select two.)
A. Within a column, there can be empty slots between drives.
B. Columns of drives must be of the same drive type and rotational speed for HDDs.
C. Drives must be added in identical pairs.
D. The LFF enclosure cannot be mixed with the SFF enclosure on the same node pair,
E. All columns have to contain the same number of drives.
Answer: B,C

HP   HP5-K03D   HP5-K03D Test Questions   HP5-K03D Latest Dumps
7. Your customer plans to build a two-tier architecture with one HP 3PAR StoreServ 7400. Layer 1
should be the SSD Tier, and Layer 2 should be the Fast Class Tier. After the SmartStart configuration
is complete, the customer connects to the system through the InformOS Management Console.
Which default CPGs are created during the process of initializing the storage system?
A. SSD RAID 1 and 5: Fast Class 1 and 6 default CPGs
B. SSD RAID 1 and 5: Fast Class 1 and 5 default CPGs
C. SSD RAID 1,5,and 6; Fast Class 1 and 6 default CPGs
D. SSD RAID 1 and 5 FastClass 1,5 and 6 default CPGs
Answer: A

HP Exam Questions   HP5-K03D Dumps PDF   HP5-K03D questions   HP5-K03D study guide

NO.3 What must be done prior to running HP 3PAR SmartStart?
A. The service laptop needs to be connected to the StoreServ system.
B. The Service Processor and StoreServ system must be connected to the same subnet
C. An installation service call must be placed with HP Central,
D. A zone must be created between the StoreServ system and the Service Processor.
Answer: B

HP Bootcamp   HP5-K03D Study Guide   HP5-K03D   HP5-K03D exam

NO.4 A customer has an existing c70fJ0 enclosure, with 6 blades and FlexFabric modules. You have
been asked to install 5 additional blades for a virtualization project. The customer requires shared
storage for a Hyper-V cluster.
Their existing storage infrastructure is 1Gb iSCSI.
What would be the most cost-effective method for adding a new 3PAR storage?
A. Directly attach the FC Host ports of the c7000.
B. Install SAN Switch Modules in the c7000.
C. Install two Brocade 8 / 8 SAN Switches
D. Upgrade the network switches to 10GB
Answer: A

HP Test Questions   HP5-K03D Free download   HP5-K03D   HP5-K03D