CheckPoint certification 156-215.75 best exam questions and answers

There are a lot of sites provide the CheckPoint 156-215.75 exam certification and other training materials for you . Pass4Test is only website which can provide you CheckPoint 156-215.75 exam certification with high quality. In the guidance and help of Pass4Test, you can through your CheckPoint 156-215.75 exam the first time. The questions and the answer provided by Pass4Test are IT experts use their extensive knowledge and experience manufacturing out . It can help your future in the IT industry to the next level.

Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. They would choose this difficult CheckPoint certification 156-215.75 exam to get certification and gain recognition in IT area. CheckPoint 156-215.75 is very difficult and passing rate is relatively low. But enrolling in the CheckPoint certification 156-215.75 exam is a wise choice, because in today's competitive IT industry, we should constantly upgrade ourselves. However, you can choose many ways to help you pass the exam.

Exam Code: 156-215.75
Exam Name: CheckPoint (Check Point Certified Security Administrator)
One year free update, No help, Full refund!
Total Q&A: 531 Questions and Answers
Last Update: 2014-02-04

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the CheckPoint 156-215.75 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose Pass4Test's CheckPoint 156-215.75 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select Pass4Test's CheckPoint 156-215.75 exam training materials, and it is absolutely trustworthy.

Pass4Test is a professional website. It focuses on the most advanced CheckPoint 156-215.75 for the majority of candidates. With Pass4Test, you no longer need to worry about the CheckPoint 156-215.75 exam. Pass4Test exam questions have good quality and good service. As long as you choose Pass4Test, Pass4Test will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.

There are many ways to help you prepare for your CheckPoint 156-215.75 exam. Pass4Test provide a reliable training tools to help you prepare for your CheckPoint 156-215.75 exam certification. The Pass4Test CheckPoint 156-215.75 exam materials are including test questions and answers. Our materials are very good sofeware that through the practice test. Our materials will meet all of theIT certifications.

In the information era, IT industry is catching more and more attention. In the society which has a galaxy of talents, there is still lack of IT talents. Many companies need IT talents, and generally, they investigate IT talents's ability in according to what IT related authentication certificate they have. So having some IT related authentication certificate is welcomed by many companies. But these authentication certificate are not very easy to get. CheckPoint 156-215.75 is a quite difficult certification exams. Although a lot of people participate in CheckPoint 156-215.75 exam, the pass rate is not very high.

156-215.75 Free Demo Download: http://www.pass4test.com/156-215.75.html

NO.1 Which of the following statements about Bridge mode is TRUE.?
A. When managing a Security Gateway in Bridge mode, it is possible to use a bridge interface for Network
Address Translation.
B. Assuming a new installation, bridge mode requires changing the existing IP routing of the network.
C. All ClusterXL modes are supported.
D. A bridge must be configured with a pair of interfaces.
Answer: D

CheckPoint   156-215.75 certification training   156-215.75 exam simulations   156-215.75   156-215.75   156-215.75 answers real questions

NO.2 The customer has a small Check Point installation which includes one Windows 2003 server as
SmartConsole and Security Management Server with a second server running SecurePlatform as
Security Gateway. This is an example of a(n):
A. Hybrid Installation.
B. Unsupported configuration.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: C

CheckPoint exam   156-215.75   156-215.75 study guide

NO.3 When Jon first installed the system, he forgot to configure DNS servers on his Security Gateway.
How could Jon configure DNS servers now that his Security Gateway is in production?
A. Login to the firewall using SSH and run cpconfig, then select Domain Name Servers.
B. Login to the firewall using SSH and run fwm, then select System Configuration and Domain Name
Servers.
C. Login to the SmartDashboard, edit the firewall Gateway object, select the tab Interfaces, then Domain
Name Servers.
D. Login to the firewall using SSH and run sysconfig, then select Domain Name Servers.
Answer: D

CheckPoint   156-215.75 original questions   156-215.75

NO.4 When doing a Stand-Alone Installation, you would install the Security Management Server with which
other Check Point architecture component?
A. SecureClient
B. Security Gateway
C. SmartConsole
D. None, Security Management Server would be installed by itself
Answer: B

CheckPoint exam dumps   156-215.75   156-215.75   156-215.75 practice test   156-215.75

NO.5 You are installing a Security Management Server. Your security plan calls for three administrators for
this particular server. How many can you create during installation?
A. Depends on the license installed on the Security Management Server
B. Only one with full access and one with read-only access
C. One
D. As many as you want
Answer: C

CheckPoint original questions   156-215.75   156-215.75   156-215.75   156-215.75

NO.6 The customer has a small Check Point installation which includes one Windows 2003 server as the
SmartConsole and a second server running SecurePlatform as both Security Management Server and
the Security Gateway. This is an example of a(n):
A. Unsupported configuration.
B. Hybrid Installation.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: D

CheckPoint test answers   156-215.75   156-215.75   156-215.75 test   156-215.75 exam prep   156-215.75 practice test

NO.7 You are a security architect and need to design a secure firewall, VPN and IPS solution. Where would
be the best place to install IPS in the topology if the internal network is already protected?
A. On the firewall itself to protect all connected networks centrally.
B. On each network segment separately.
C. On the LAN is enough, the DMZ does not need to be protected.
D. In front of the firewall is enough.
Answer: A

CheckPoint   156-215.75   156-215.75 exam   156-215.75 test questions

NO.8 R75's INSPECT Engine inserts itself into the kernel between which two layers of the OSI model?
A. Presentation and Application
B. Physical and Data
C. Session and Transport
D. Data and Network
Answer: D

CheckPoint pdf   156-215.75 certification training   156-215.75   156-215.75

NO.9 UDP packets are delivered if they are _________.
A. A legal response to an allowed request on the inverse UDP ports and IP
B. A Stateful ACK to a valid SYN-SYN-/ACK on the inverse UDP ports and IP
C. Reference in the SAM related Dynamic tables
D. Bypassing the Kernel by the forwarding layer
of clusterXL
Answer: A

CheckPoint   156-215.75   156-215.75 test answers   156-215.75 exam   156-215.75 practice test

NO.10 Of the three mechanisms Check Point uses for controlling traffic, which enables firewalls to incorporate
layer 4 awareness in packet inspection?
A. IPS
B. Packet filtering
C. Stateful Inspection
D. Application Intelligence
Answer: C

CheckPoint   156-215.75 dumps torrent   156-215.75   156-215.75

NO.11 You are running the Security Gateway on SecurePlatform and configure SNX with default settings. The
client fails to connect to the Security Gateway. What is wrong?
A. The routing table on the client does not get modified.
B. The client has Active-X blocked.
C. The client is configured incorrectly.
D. The SecurePlatform Web User Interface is listening on port 443.
Answer: D

CheckPoint answers real questions   156-215.75 pdf   156-215.75 exam simulations

NO.12 During which step in the installation process is it necessary to note the fingerprint for first-time
verification?
A. When establishing SIC between the Security Management Server and the Gateway
B. When configuring the Security Management Server using cpconfig
C. When configuring the Security Gateway object in SmartDashboard
D. When configuring the Gateway in the WebUl
Answer: B

CheckPoint   156-215.75   156-215.75   156-215.75

NO.13 The customer has a small Check Point installation, which includes one Linux Enterprise 3.0 server
working as the SmartConsole, and a second server running Windows 2003 as both Security Management
Server running Windows 2003 as both Security Management Server and Security Gateway. This is an
example of a(n).
A. Stand-Alone Installation
B. Distributed Installation
C. Hybrid Installation
D. Unsupported configuration
Answer: D

CheckPoint   156-215.75 certification training   156-215.75 test answers

NO.14 Which SmartConsole component can Administrators use to track remote administrative activities?
A. WebUI
B. Eventia Reporter
C. SmartView Monitor
D. SmartView Tracker
Answer: D

CheckPoint questions   156-215.75   156-215.75 braindump

NO.15 How can you recreate the account of the Security Administrator, which was created during initial
installation of the Management Server on SecurePlatform?
A. Launch cpconfig and delete the Administrator's account. Recreate the account with the same name.
B. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete
the Administrator Account portion of the file. You will be prompted to create a new account.
C. Type cpm -a, and provide the existing Administrator's account name. Reset the Security
Administrator's password.
D. Launch SmartDashboard in the User Management screen, and delete the cpconfig administrator.
Answer: A

CheckPoint   156-215.75 dumps torrent   156-215.75   156-215.75   156-215.75   156-215.75 study guide

NO.16 Once installed, the R75 kernel resides directly below which layer of the OSI model? Note: Application
is the top and Physical is the bottom of the IP stack.
A. Network
B. Transport
C. Data Link
D. Session
Answer: A

CheckPoint questions   156-215.75 certification training   156-215.75

NO.17 Which of the following statements is TRUE about management plug-ins?
A. The plug-in is a package installed on the Security Gateway.
B. A management plug-in interacts with a Security Management Server to provide new features and
support for new products.
C. Using a plug-in offers full central management only if special licensing is applied to specific features of
the plug-in.
D. Installing a management plug-in is just like an upgrade process. (It overwrites existing components.)
Answer: B

CheckPoint answers real questions   156-215.75 exam   156-215.75   156-215.75

NO.18 The Check Point Security Gateway's virtual machine (kernel) exists between which two layers of the
OSI model?
A. Session and Network layers
B. Application and Presentation layers
C. Physical and Datalink layers
D. Network and Datalink layers
Answer: D

CheckPoint certification   156-215.75   156-215.75 certification   156-215.75 braindump

NO.19 The customer has a small Check Point installation which includes one Windows XP workstation as the
SmartConsole, one Solaris server working as Security Management Server, and a third server running
SecurePlatform as Security Gateway. This is an example of a(n):
A. Stand-Alone Installation.
B. Unsupported configuration
C. Distributed Installation.
D. Hybrid Installation.
Answer: C

CheckPoint test questions   156-215.75 answers real questions   156-215.75 dumps   156-215.75 exam

NO.20 How can you most quickly reset Secure Internal Communications (SIC) between a Security
Management Server and Security Gateway?
A. Run the command fwm sic-reset to initialize the Internal Certificate Authority (ICA) of the Security
Management Server. Then retype the activation key on the Security Gateway from SmartDashboard.
B. Use SmartDashboard to retype the activation key on the Security Gateway. This will automatically
Sync SIC to both the Security Management Server and Gateway.
C. From cpconfig on the Gateway, choose the Secure Internal Communication option and retype the
activation key. Next, retype the same key in the Gateway object in SmartDashboard and reinitialize
Secure Internal Communications (SIC).
D. From the Security Management Server s command line, Type fw putkey p <shared key> < IP Address
of security Gateway>.
Answer: C

CheckPoint exam dumps   156-215.75   156-215.75 questions   156-215.75 pdf

Pass4Test offer the latest HP2-E58 exam material and high-quality 70-417 pdf questions & answers. Our 00M-229 VCE testing engine and 700-302 study guide can help you pass the real exam. High-quality C2040-442 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/156-215.75.html