If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Juniper JN0-201 exam. You can use Pass4Test's Juniper JN0-201 exam training materials. The training materials of Pass4Test are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.
Pass4Test is website that can take you access to the road of success. Pass4Test can provide the quickly passing Juniper certification JN0-201 exam training materials for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Juniper certification JN0-201 exam for only one-time.
Add Pass4Test's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Juniper certification JN0-201 exam. At last, you will not regret your choice.
In order to pass Juniper certification JN0-201 exam, selecting the appropriate training tools is very necessary. And professional study materials about Juniper certification JN0-201 exam is a very important part. Our Pass4Test can have a good and quick provide of professional study materials about Juniper certification JN0-201 exam. Our Pass4Test IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. Pass4Test is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.
Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2013-12-25
JN0-201 Free Demo Download: http://www.pass4test.com/JN0-201.html
NO.1 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper exam JN0-201 JN0-201 study guide JN0-201
NO.2 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper answers real questions JN0-201 JN0-201 exam simulations JN0-201 original questions JN0-201 certification JN0-201 exam dumps
NO.3 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
Juniper JN0-201 exam dumps JN0-201 test questions JN0-201 exam
NO.4 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
Juniper exam dumps JN0-201 JN0-201 JN0-201
NO.5 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
Juniper JN0-201 test JN0-201 JN0-201 exam simulations
NO.6 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper study guide JN0-201 test JN0-201 demo JN0-201 practice test JN0-201 study guide
NO.7 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper pdf JN0-201 test JN0-201 JN0-201
NO.8 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper exam simulations JN0-201 JN0-201 answers real questions JN0-201 JN0-201 certification training
NO.9 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper original questions JN0-201 JN0-201 demo JN0-201
NO.10 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper answers real questions JN0-201 JN0-201 exam simulations
NO.11 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper JN0-201 dumps JN0-201 dumps torrent JN0-201 JN0-201 JN0-201
NO.12 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper test answers JN0-201 exam simulations JN0-201 exam JN0-201 JN0-201 test
NO.13 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper dumps torrent JN0-201 exam simulations JN0-201 demo JN0-201 JN0-201
NO.14 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper demo JN0-201 certification training JN0-201 JN0-201 JN0-201
NO.15 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper JN0-201 demo JN0-201 JN0-201
NO.16 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper JN0-201 JN0-201
NO.17 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper practice test JN0-201 practice test JN0-201 JN0-201 certification training JN0-201 questions JN0-201 practice test
NO.18 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper JN0-201 pdf JN0-201 questions JN0-201 pdf
NO.19 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper exam prep JN0-201 questions JN0-201 test questions JN0-201 certification JN0-201 practice test
NO.20 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 JN0-201 dumps
Pass4Test offer the latest LOT-407 exam material and high-quality 1Y0-A28 pdf questions & answers. Our FCNSP.v5 VCE testing engine and 70-460 study guide can help you pass the real exam. High-quality 700-505 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.pass4test.com/JN0-201.html
没有评论:
发表评论