Citrix certification 1Y0-A28 exam training programs

When you click into Pass4Test's site, you will see so many people daily enter the website. You can not help but be surprised. In fact, this is normal. Pass4Test is provide different training materials for alot of candidates. They are using our training materials tto pass the exam. This shows that our Citrix 1Y0-A28 exam training materials can really play a role. If you want to buy, then do not miss Pass4Test website, you will be very satisfied.

IT certification candidates are mostly working people. Therefore, most of the candidates did not have so much time to prepare for the exam. But they need a lot of time to participate in the certification exam training courses. This will not only lead to a waste of training costs, more importantly, the candidates wasted valuable time. Here, I recommend a good learning materials website. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the Citrix 1Y0-A28 exam. Pass4Test Citrix 1Y0-A28 exammaterials can not only help you save a lot of time. but also allows you to pass the exam successfully. So you have no reason not to choose it.

Exam Code: 1Y0-A28
Exam Name: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
One year free update, No help, Full refund!
Total Q&A: 123 Questions and Answers
Last Update: 2014-01-02

If you choose Pass4Test, success is not far away for you. And soon you can get Citrix certification 1Y0-A28 exam certificate. The product of Pass4Test not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service.

We all well know the status of Citrix certification 1Y0-A28 exams in the IT area is a pivotal position, but the key question is to be able to get Citrix 1Y0-A28 certification is not very simple. We know very clearly about the lack of high-quality and high accuracy exam materials online. Exam practice questions and answers Pass4Test provide for all people to participate in the IT industry certification exam supply all the necessary information. Besides, it can all the time provide what you want. Buying all our information can guarantee you to pass your first Citrix certification 1Y0-A28 exam.

1Y0-A28 Free Demo Download: http://www.pass4test.com/1Y0-A28.html

NO.1 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix   1Y0-A28 certification training   1Y0-A28 test

NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix   1Y0-A28   1Y0-A28   1Y0-A28 exam prep
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix certification training   1Y0-A28 braindump   1Y0-A28   1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   1Y0-A28 braindump   1Y0-A28
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix   1Y0-A28   1Y0-A28 braindump   1Y0-A28 answers real questions   1Y0-A28 questions
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix certification training   1Y0-A28   1Y0-A28 exam simulations
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix   1Y0-A28 braindump   1Y0-A28   1Y0-A28   1Y0-A28 original questions   1Y0-A28
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix   1Y0-A28   1Y0-A28   1Y0-A28 demo
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix answers real questions   1Y0-A28   1Y0-A28 answers real questions   1Y0-A28   1Y0-A28 practice test

NO.3 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix   1Y0-A28   1Y0-A28 test questions   1Y0-A28 certification training

NO.4 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix   1Y0-A28   1Y0-A28   1Y0-A28   1Y0-A28   1Y0-A28 exam

NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix   1Y0-A28 exam simulations   1Y0-A28 certification training

Pass4Test offer the latest LOT-405 exam material and high-quality 700-501 pdf questions & answers. Our 70-342 VCE testing engine and 350-029 study guide can help you pass the real exam. High-quality 700-101 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/1Y0-A28.html