Pass4Test HP HP0-Y35 exam practice questions and answers

Pass4Test HP HP0-Y35 exam training materials are provided in PDF format and software format. It contains HP HP0-Y35 exam questions and answers. These issues are perfect, Which can help you to be successful in the HP HP0-Y35 exam. Pass4Test HP HP0-Y35 exam comprehensively covers all syllabus and complex issues. The Pass4Test HP HP0-Y35 exam questions and answers is the real exam challenges, and help you change your mindset.

Please select our Pass4Test to achieve good results in order to pass HP certification HP0-Y35 exam, and you will not regret doing so. It is worth spending a little money to get so much results. Our Pass4Test can not only give you a good exam preparation, allowing you to pass HP certification HP0-Y35 exam, but also provide you with one-year free update service.

Exam Code: HP0-Y35
Exam Name: HP (Wireless Networks - ASE 2011 Delta Exam)
One year free update, No help, Full refund!
Total Q&A: 75 Questions and Answers
Last Update: 2013-11-10

Pass4Test provide you the product with high quality and reliability. You can free download online part of Pass4Test's providing practice questions and answers about the HP certification HP0-Y35 exam as a try. After your trail I believe you will be very satisfied with our product. Such a good product which can help you pass the exam successfully, what are you waiting for? Please add it to your shopping cart.

Having a HP HP0-Y35 certification can enhance your employment prospects,and then you can have a lot of good jobs. Pass4Test is a website very suitable to candidates who participate in the HP certification HP0-Y35 exam. Pass4Test can not only provide all the information related to the HP certification HP0-Y35 exam for the candidates, but also provide a good learning opportunity for them. Pass4Test be able to help you pass HP certification HP0-Y35 exam successfully.

Pass4Test HP HP0-Y35 exam training materials can help you to come true your dreams. Because it contains all the questions of HP HP0-Y35 examination. With Pass4Test, you could throw yourself into the exam preparation completely. With high quality training materials by Pass4Test provided, you will certainly pass the exam. Pass4Test can give you a brighter future.

HP0-Y35 Free Demo Download: http://www.pass4test.com/HP0-Y35.html

NO.1 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP test   HP0-Y35 practice test   HP0-Y35 answers real questions

NO.2 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP original questions   HP0-Y35   HP0-Y35   HP0-Y35

NO.3 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP   HP0-Y35   HP0-Y35   HP0-Y35 pdf   HP0-Y35

NO.4 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP   HP0-Y35   HP0-Y35   HP0-Y35

NO.5 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35 test answers   HP0-Y35   HP0-Y35

NO.6 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP certification   HP0-Y35   HP0-Y35 exam prep   HP0-Y35 braindump

NO.7 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP certification   HP0-Y35   HP0-Y35   HP0-Y35

NO.8 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP practice test   HP0-Y35 certification training   HP0-Y35 certification

NO.9 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP   HP0-Y35 answers real questions   HP0-Y35

NO.10 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP   HP0-Y35   HP0-Y35 study guide   HP0-Y35

NO.11 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP   HP0-Y35   HP0-Y35

NO.12 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP   HP0-Y35 questions   HP0-Y35 test answers   HP0-Y35 braindump

NO.13 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP exam simulations   HP0-Y35   HP0-Y35   HP0-Y35

NO.14 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP original questions   HP0-Y35 answers real questions   HP0-Y35 exam   HP0-Y35 questions   HP0-Y35 test

NO.15 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP braindump   HP0-Y35 exam   HP0-Y35 study guide   HP0-Y35   HP0-Y35 pdf

Pass4Test offer the latest 70-466 exam material and high-quality 200-001 pdf questions & answers. Our 646-365 VCE testing engine and E20-891 study guide can help you pass the real exam. High-quality 700-101 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/HP0-Y35.html