Juniper certification JN0-360 exam training methods

God wants me to be a person who have strength, rather than a good-looking doll. When I chose the IT industry I have proven to God my strength. But God forced me to keep moving. Juniper JN0-360 exam is a major challenge in my life, so I am desperately trying to learn. But it does not matter, because I purchased Pass4Test's Juniper JN0-360 exam training materials. With it, I can pass the Juniper JN0-360 exam easily. Road is under our feet, only you can decide its direction. To choose Pass4Test's Juniper JN0-360 exam training materials, and it is equivalent to have a better future.

Juniper certification JN0-360 exam is very popular among the IT people to enroll in the exam. Passing Juniper certification JN0-360 exam can not only chang your work and life can bring, but also consolidate your position in the IT field. But the fact is that the passing rate is very low.

Are you one of them? Are you still worried and confused because of the the various exam materials and fancy training courses exam? Pass4Test is the right choice for you. Because we can provide you with a comprehensive exam, including questions and answers. All of these will help you to acquire a better knowledge, we are confident that you will through Pass4Test the Juniper JN0-360 certification exam. This is our guarantee to all customers.

Exam Code: JN0-360
Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
One year free update, No help, Full refund!
Total Q&A: 252 Questions and Answers
Last Update: 2013-09-07

Pass4Test senior experts have developed exercises and answers about Juniper certification JN0-360 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use Pass4Test's products, Pass4Test can help you 100% pass your first time to attend Juniper certification JN0-360 exam. If you fail the exam, we will give a full refund to you.

Through the Juniper certification JN0-360 exam method has a lot of kinds, spend a lot of time and energy to review the Juniper certification JN0-360 exam related professional knowledge is a kind of method, through a small amount of time and money Pass4Test choose to use the pertinence training and exercises is also a kind of method.

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So Pass4Test is not only the best choice for you to participate in the Juniper certification JN0-360 exam, but also the best protection for your success.

If you're still studying hard to pass the Juniper JN0-360 exam, Pass4Test help you to achieve your dream. We provide you with the best Juniper JN0-360 exam materials. It passed the test of practice, and with the best quality. It is better than Juniper JN0-360 tutorials and any other related materials. It can help you to pass the Juniper JN0-360 exam, and help you to become a strong IT expert.

JN0-360 Free Demo Download: http://www.pass4test.com/JN0-360.html

NO.1 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

Juniper   JN0-360   JN0-360 dumps   JN0-360

NO.2 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper   JN0-360   JN0-360 dumps   JN0-360

NO.3 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper   JN0-360 test questions   JN0-360 pdf   JN0-360

NO.4 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

Juniper dumps torrent   JN0-360   JN0-360   JN0-360 pdf   JN0-360 test

NO.5 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

Juniper test   JN0-360 demo   JN0-360   JN0-360 certification   JN0-360 pdf   JN0-360

NO.6 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper original questions   JN0-360   JN0-360 dumps torrent

NO.7 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper exam simulations   JN0-360 certification   JN0-360

NO.8 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

Juniper   JN0-360 dumps   JN0-360   JN0-360 answers real questions

NO.9 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper test   JN0-360   JN0-360   JN0-360 test questions

NO.10 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper   JN0-360   JN0-360   JN0-360 demo   JN0-360

NO.11 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

Juniper   JN0-360   JN0-360 exam   JN0-360   JN0-360 answers real questions

NO.12 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper exam simulations   JN0-360 test   JN0-360 braindump   JN0-360 certification

NO.13 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper   JN0-360 certification   JN0-360   JN0-360   JN0-360

NO.14 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper   JN0-360   JN0-360

NO.15 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper braindump   JN0-360 questions   JN0-360 questions

NO.16 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360 pdf   JN0-360   JN0-360 test   JN0-360

NO.17 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper   JN0-360 exam   JN0-360   JN0-360

NO.18 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

Juniper   JN0-360   JN0-360   JN0-360   JN0-360   JN0-360 exam dumps

NO.19 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

Juniper   JN0-360 exam simulations   JN0-360   JN0-360   JN0-360   JN0-360 study guide

NO.20 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

Juniper   JN0-360   JN0-360 original questions   JN0-360 exam   JN0-360 pdf

Pass4Test offer the latest 70-341 exam material and high-quality LOT-404 pdf questions & answers. Our LOT-951 VCE testing engine and 70-464 study guide can help you pass the real exam. High-quality E20-018 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/JN0-360.html