70-683 exam dumps

Great Sale - Get 10% OFF on ALL Exams, Pass4Test Discount Code: pass4test

Pass4Test is a website which always provide you the latest and most accurate information about Microsoft certification 70-683 exam. In order to allow you to safely choose us, you can free download part of the exam practice questions and answers on Pass4Test website as a free try. Pass4Test can ensure you 100% pass Microsoft certification 70-683 exam.

With Pass4Test's help, you do not need to spend a lot of money to participate in related cram or spend a lot of time and effort to review the relevant knowledge, but can easily pass the exam. Simulation test software of Microsoft 70-683 exam is developed by Pass4Test's research of previous real exams. Pass4Test's Microsoft 70-683 exam practice questions have a lot of similarities with the real exam practice questions.

In real life, every great career must have the confidence to take the first step. When you suspect your level of knowledge, and cramming before the exam, do you think of how to pass the Microsoft 70-683 exam with confidence? Do not worry, Pass4Test is the only provider of training materials that can help you to pass the exam. Our training materials, including questions and answers, the pass rate can reach 100%. With Pass4Test Microsoft 70-683 exam training materials, you can begin your first step forward. When you get the certification of Microsoft 70-683 exam, the glorious period of your career will start.

With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Microsoft's 70-683 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. Pass4Test has the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans. We guarantee you 100% certified. Candidates who participate in the Microsoft 70-683 certification exam, what are you still hesitant？Just do it quickly!

Pass4Test is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose Pass4Test to help you. Pass4Test can make you feel at ease, because we have a lot of IT certification exam related training materials with high quality, coverage of the outline and pertinence, too, which will bring you a lot of help. You won't regret to choose Pass4Test, it can help you build your dream career.

Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Microsoft certification 70-683 exam. Pass4Test are able to provide you with test exercises which are closely similar with real exam questions.

Exam Code: 70-683
Exam Name: Microsoft (TS: Windows 7, Preinstalling for OEMs )
One year free update, No help, Full refund!
Updated: 2013-08-22

70-683 Free Demo Download: http://www.pass4test.com/70-683.html

NO.1 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C

Microsoft   70-683 practice test   70-683

NO.2 You have Windows Image (WIM) file that contains an image of Windows 7. You plan to deploy the
image to computers that have a third-party hardware component. The device driver for the hardware
component can only be installed by using an executable provided by the hardware vendor. You need to
ensure that the device driver is installed when you deploy the image. What should you do first?
A.On a reference computer, run Drvload.exe.
B.On a reference computer, run Imagex.exe and specify the /apply parameter.
C.On a technicians computer, run Imagex.exe and specify the /mount parameter.
D.On a technicians computer, run Dism.exe and specify the /add-driver parameter.
Answer: B

Microsoft   70-683 questions   70-683

NO.3 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D

Microsoft test answers   70-683   70-683   70-683 test   70-683

NO.4 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D

Microsoft   70-683   70-683   70-683

NO.5 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B

Microsoft exam simulations   70-683   70-683 test answers   70-683

NO.6 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D

Microsoft original questions   70-683 test   70-683

NO.7 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C

Microsoft   70-683   70-683

NO.8 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B

Microsoft exam   70-683   70-683 pdf

NO.9 You have a Windows Image (WIM) file named Image.wim that contains a Windows 7 image. The
default compression settings were used when creating the WIM file. You create a new image. You need to
ensure that both images are stored by using maximum compression. What should you do?
A.Append the new image to Image.wim.
B.Export the existing image, and then append the new image to Image.wim.
C.Run Compact.exe and specify the /c parameter. Run Dism.exe and specify the /remount-WIM
parameter.
D.Run Imagex.exe and specify the /mountrw parameter. Run Dism.exe and specify the /cleanup-WIM
parameter.
Answer: B

Microsoft   70-683 practice test   70-683 questions

NO.10 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B

Microsoft questions   70-683 dumps   70-683 dumps   70-683

As a main supplier for IT certification exam training. Pass4Test's IT experts continually provide you the high quality product and a free online customer service, but also update the exam outline with the fastest speed.