Hitachi certification HH0-260 exam questions and answers come out

Pass4Test's Hitachi HH0-260 exam training materials is virtually risk-free for you at the time of purchase. Before you buy, you can enter Pass4Test website to download the free part of the exam questions and answers as a trial. So you can see the quality of the exam materials and we Pass4Testis friendly web interface. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you. We absolutely protect the interests of consumers. Training materials provided by Pass4Test are very practical, and they are absolutely right for you. We can make you have a financial windfall.

To choose our Pass4Test to is to choose success! Pass4Test provide you Hitachi certification HH0-260 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal Hitachi certification HH0-260 examination are necessary, and also very effective. If you choose Pass4Test, you can 100% pass the exam.

If you want to through the Hitachi HH0-260 certification exam to make a stronger position in today's competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And pass the Hitachi HH0-260 exam is not easy. Perhaps through Hitachi HH0-260 exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Pass4Test's Hitachi HH0-260 exam training materials. This is training product that specifically made for IT exam. With it you can pass the difficult Hitachi HH0-260 exam effortlessly.

There are too many variables and unknown temptation in life. So we should lay a solid foundation when we are still young. Are you ready? Working in the IT industry, do you feel a sense of urgency? Pass4Test's Hitachi HH0-260 exam training materials is the best training materials. Select the Pass4Test, then you will open your door to success. Come on!

Exam Code: HH0-260

Exam Name: Hitachi (Hitachi Data Systems Certified Implementer File Services)

HH0-260 Free Demo Download: http://www.pass4test.com/HH0-260.html

NO.1 Which three tenant management console permissions does the security role have on a HCP?
(Choose three.)
A. View namespace access protocol configurations.
B. View tenant log messages about security events.
C. View tenant overview.
D. Monitor replication.
E. Modify tenant management console security settings (HCP tenants only).
Answer: B,C,E

Hitachi   HH0-260 certification training   HH0-260 pdf   HH0-260 exam dumps   HH0-260 exam simulations

NO.2 Which two statements are true about the HCP back-end network? (Choose two.)
A. All nodes in a HCP system must be on the same system-specific private back-end IP subnet.
B. All nodes in a HCP system must be split across a dual-redundant private back-end IP subnet.
C. The fourth octet of the back-end IP addresses should not be changed after it has been
configured.
D. The fourth octet of the back-end IP addresses must match the fourth octets used in the front-end
IP
addresses.
Answer: A,C

Hitachi   HH0-260   HH0-260   HH0-260   HH0-260   HH0-260 practice test

NO.3 You are establishing a replication link between two HCP platforms. You set the performance
level as
part of the configuration options. What does this setting indicate?
A. the server priority rate for nodes associated with that replication link
B. the amount of bandwidth made available for replication on the link
C. the number of concurrent replication operations that can occur on each node
D. the data transfer rate associated with each tenant namespace
Answer: C

Hitachi pdf   HH0-260 test answers   HH0-260

NO.4 Which node architecture is used by the HCP 500?
A. SAIN
B. PAIN
C. RAIN
D. NAIN
Answer: A

Hitachi   HH0-260   HH0-260 questions

NO.5 What is the required zone configuration of a SAN fabric to support a HCP 500?
A. one global zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports and
the
storage ports
B. one zone per HCP node containing two members: World Wide Port Names (WWPN) of the HBA
port
and the storage port
C. two mirrored zones; one containing the even numbered World Wide Port Names (WWPN) of the
HBA
port and the storage port; the other containing odd numbered ports
D. two zones: one zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports
and
the second zone containing all the storage ports
Answer: B

Hitachi   HH0-260   HH0-260 test   HH0-260

NO.6 A storage administrator on a customer site is performing a diagnosis of the HCP system by
reviewing the system event logs.
Which two are recorded in the system events log? (Choose two.)
A. logical volume failures
B. namespace list
C. users deleted
D. roles assigned
Answer: A,C

Hitachi test answers   HH0-260 original questions   HH0-260 test questions   HH0-260   HH0-260 questions

NO.7 You are configuring a HCP 500 solution with AMS 2100 storage. You choose to configure the
storage devices first in the list of tasks associated with this process.
What is the reason for sequencing the tasks in this way?
A. The HCP software must first be installed on the AMS 2100 for access.
B. Formatting the storage containers will take a considerable amount of time.
C. You must have the data LUNs established before you can install the core OS.
D. The HCP command LUN must be established on the AMS 2100.
Answer: B

Hitachi   HH0-260 pdf   HH0-260

NO.8 Your customer wants to use IP addresses which conflict with the default HCP network
settings. As a result you need to change the back-end IP addresses for each HCP node.
Which HCP network settings should you change?
A. the back-end gateway router IP address
B. the back-end subnet mask
C. the first three octets of the back-end IP addresses
D. the fourth octet of the back-end IP addresses
Answer: C

Hitachi   HH0-260   HH0-260 study guide   HH0-260 exam simulations   HH0-260 certification training   HH0-260 practice test

NO.9 Which OS LUN size do all HCP 300 configurations use?
A. 20 GB
B. 30 GB
C. 50 GB
D. 400 GB
Answer: B

Hitachi   HH0-260 exam dumps   HH0-260   HH0-260

NO.10 A customer has an existing HCP 500 consisting of four storages nodes. They have just
purchased an additional HCP 500 and you are informed that you will be performing the replication
setup.
What is the requirement prior to setting up replication?
A. trusted replication server certificates
B. replication link
C. outbound link name
D. inbound link name
Answer: A

Hitachi exam prep   HH0-260 questions   HH0-260 questions

NO.11 You have performed an upgrade on a customer's HCP. You complete the upgrade and verify
that all the nodes are online and then give the system back to the customer. A few minutes later,
the customer
complains that they can read existing content but they cannot create new content on the HCP.
Which step was missed?
A. The install user password was changed.
B. The upgrade was not committed.
C. The rollback was not performed.
D. The system management console is disabled.
Answer: B

Hitachi study guide   HH0-260   HH0-260   HH0-260   HH0-260

NO.12 You are adding two more volumes into each node of a HCP 500 DL. The storage administrator
informs you that all SAN volumes have been created, zoned and presented to the HCP.
Which LUN number presented to the HCP will cause a problem.?
A. 5
B. 128
C. 130
D. 131
Answer: B

Hitachi original questions   HH0-260   HH0-260 exam   HH0-260 exam dumps   HH0-260

NO.13 Which two factors should you consider prior to performing an upgrade? (Choose two.)
A. the physical location of the highest numbered search node
B. the physical location of the highest numbered storage node
C. the install user password
D. the service user password
Answer: B,C

Hitachi   HH0-260   HH0-260 certification training   HH0-260

NO.14 In a SAIN based HCP solution, which RAID protection scheme is considered standard use with
an
AMS 2000 system?
A. RAID 5 (6+1)
B. RAID 6 (5+2)
C. RAID 6 (6+2)
D. RAID 5 (7+1)
Answer: B

Hitachi exam prep   HH0-260 dumps   HH0-260   HH0-260   HH0-260

NO.15 Which three replication types are supported by HCP? (Choose three.)
A. chain
B. many-to-one
C. one-to-many
D. bidirectional
E. link level
Answer: A,B,D

Hitachi   HH0-260   HH0-260   HH0-260 certification training   HH0-260 braindump

NO.16 A customer expects to store 4 billion objects with an initial HCP configuration. Search is not
required at this time.
Which configuration will meet the requirements for this customer?
A. HCP 300 with ten storage nodes
B. HCP 500 with two storage nodes
C. HCP 300 with four storage nodes
D. HCP 500 with eight storage nodes
Answer: A

Hitachi   HH0-260   HH0-260   HH0-260

NO.17 A customer wants to ingest around 1 million files residing in several Windows 2003 and
RedHat Linux servers into three newly created HCP tenants and namespaces.
Which two procedures do you recommend? (Choose two.)
A. Use copy, move and create directory functions available from HCP client tools for Linux.
B. Use copy, move and create directory functions available from Linux server.
C. Use copy, move and create directory functions available from HCP client tools for Windows.
D. Use copy, move and create directory functions available from Windows server.
Answer: A,C

Hitachi test   HH0-260   HH0-260   HH0-260   HH0-260 certification training   HH0-260 exam simulations

NO.18 Which three statements are true about encryption on a HCP? (Choose three.)
A. Once enabled, encryption cannot be disabled.
B. The encryption key is accessible through the system management console.
C. Encryption can only be enabled at the time of installation.
D. The encryption key must be written down and given to the customer.
E. The encryption key is displayed several times during the installation process.
Answer: A,C,D

Hitachi dumps   HH0-260 pdf   HH0-260 exam   HH0-260 practice test   HH0-260

NO.19 A customer will be removing old Windows file servers and moving existing data to the default
namespace on their new HCP 500.
Which protocol is recommended to accomplish the move?
A. CIFS
B. HTTP
C. REST
D. NFS
Answer: A

Hitachi study guide   HH0-260   HH0-260

NO.20 How should the RAID group(s) and logical volume(s) be configured on a HCP 300 node?
A. three RAID groups each with three logical volumes
B. three RAID groups each with a single logical volume
C. a single RAID group with a single logical volume
D. a single RAID group with three logical volumes
Answer: D

Hitachi   HH0-260 test   HH0-260 exam prep   HH0-260 demo   HH0-260 test   HH0-260

HH0-260 exam is a Hitachi certification exam and IT professionals who have passed some Hitachi certification exams are popular in IT industry. So more and more people participate in HH0-260 certification exam, but HH0-260 certification exam is not very simple. If you do not have participated in a professional specialized training course, you need to spend a lot of time and effort to prepare for the exam. But now Pass4Test can help you save a lot of your precious time and energy.